Fujitsu P42HTA51E SERIES Direct Setting, Code Setting, White Screen, Background, Information

OTHER ADJUSTMENTS (Continued)

(6)Press <to store.

*When the Screen Orbiter function is operated, some letters at the top, bottom, right or left of the screen may be missed.

Direct Setting for RGB

You can use this option to switch the setting for RGB input signal.

Each time you press Eor F, one of the available choices appears in the following sequence:

Auto VGA WVGA 480P XGA WXGA SXGA SXGA+

[Auto]: The optimum display is obtained automatically for input signals.

[Others]: The optimum resolution setting is fixed for each signal. Press <to store.

*In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not be automatically distinguished. Switch to the fixed display when the image is not displayed properly.

*Signals that are not applicable depending on the model or input terminals may not be displayed.

Code Setting for RGB

Normally, use this option in Auto mode.

White Screen

You can use this option to display white over the entire screen to minimize phosphor burn-in.

Each time you press Eor F, one of the available choices appears in the following sequence:

Off On

Press <to store.

Background

When the screen size was set to “Normal”, to reduce “burn-in”, the brightness of the part at which left and right images are not displayed can be set. Normally, we recommend that “Light Gray” be used.

Each time you press Eor F, the settings is switched.

Black Dark Gray Light Gray

Press <to store.

* Burn-in can still occur if the Normal mode is shown for extended periods.

Information

Displays system operation status.

Select “Information” and press <.

The “Information” screen will appear.

[Mode]:	Input mode appears at the upper right corner of the screen
[Freq. Scan Mode]: Frequency scanning
[Input Signal]:	Video mode
[Input Sync]:	Signal type
[Freq.]:	Synchronized signal frequency, polarity
[Preset No.]:	RGB code number

Note

Status Display Screen (TV Mode)

•The screen display disappears if there is no operation within approximately 60 seconds.

•Depending on the model or the optional devices, some of the functions may not be available.

•The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.

•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

DownloadedE-28FromTV-Manual.com Manuals