Fujitsu P7230 manual Click Next, Configuring Using Atheros Client Utility Software

L i f e B o o k P 7 0 0 0 S e r i e s N o t e b o o k - S e c t i o n F i v e

10.Click [Next].

11.If you are using Cisco CCX, click Cisco Options to enable Cisco CKIP data encryption on the Security Settings page. Check the Cisco Compatible Exten- sions Options. If you have checked the Cisco's "Mixed-Cell" box in the Advanced Setting, this option must also be checked.

12.Click [OK].

13.Click Next.

14.Select Open, Shared, WPA-Enterprise, WPA2- Enterprise, WPA-Personal, or WPA2-Personal in the Network Authentication options.

15.Select either None, WEP, CKIP (if Enable Cisco Cli- ent eXtentions is enabled, use CKIP or WEP), or TKIP for the data encryption.

16.If WEP is selected, select either 64 or 128-bit for the Encryption Level.

17.Select the key index 1, 2, 3 or 4.

18.Enter the WEP key if required. If your network does not employ a 802.1x/EAP security mechanism, please skip to step 24.

19.Click the Enable 802.1x checkbox to enable the 802.1x security option. Please contact your network administrator if configuration of this setting is required.

20.Select the appropriate Authentication Type. Please contact your network administrator if configura- tion of this setting is required.

21.After selecting your authentication type, enter the user name, domain, and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login.

22.Click [OK] to save the settings.

23.From the Intel ProSet Wireless page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list.

24.Click the Connect button to connect to the net- work.

25.Click [Close] if you want to close the Intel PROSet for Wireless window.

Configuring Using Atheros Client Utility Software

This section explains the procedure to properly configure the WLAN device using the Atheros Client Utility. Pre-defined parameters will be required for this

procedure. Please consult with your network adminis- trator for these parameters:

Network Name - Also known as the SSID

Network Key (WEP) - Required if using static WEP keys.

Authentication Type - Open, Shared, WPA, or WPA-

PSK

Procedure

1.Activate the WLAN device using either the Wireless On/Off Switch or the Atheros Client Utility

2.Right-click on the “Atheros Client Utility” icon in the system tray, and select “Open Atheros Client Utility” from the menu.

3.From the Current Status page, click the Profile Management tab.

4.If this is your first time using this utility, highlight the profile [Default] and Click the [Modify] button, otherwise Click the [New] button. The General Set- tings dialog displays.

5.From the General page, enter a profile name in the Profile Name field.

6.Enter the network SSID, in the SSID1 field. If you wish to create a profile that can connect to up to 3 different wireless networks, SSID's can be entered in the SSID2 and SSID3 fields as well.

7.Click the Security tab.

8.The Security tab allows for the configuration of the Security modes listed in the table below. Please select the radio button of the desired security mode. If these settings are not known to you, please consult with your network administrator for the correct settings.

Field Name	Description
WPA	Enables the use of Wi-Fi Protected
	Access. Choosing WPA opens the
	WPA EAP drop-down menu.
	Options include TLS and PEAP. If
	these settings are not known to you,
	please consult with your network
	administrator for the correct settings.
WPA-PSK	Enables WPA-Pre-Shared Key. Click
	on the Configure button to enter the
	WPA Passphrase. If these settings
	are not known to you, please consult
	with your network administrator for
	the correct settings.

56