Fujitsu P7230 manual Using the Shock Sensor Utility

L i f e B o o k P 7 0 0 0 N o t e b o o k – S e c t i o n S i x

4.If “Optical Media Drive” or “CD-ROM Drive” is not at the top of the list, arrow down to the drive in the list, and press the space bar (or the + key) to move it to the top of the list. (The system attempts to boot from the devices in the order in which they are listed.). Note that the BIOS for some systems will indicate “CD-ROM Drive”, even when a DVD drive is connected.

5.If you have an external DVD drive connected, proceed to step 6; otherwise, proceed to step 7.

6.If you have an external DVD drive connected:

■Select the Advanced menu in the BIOS window.

■Scroll down to the USB Features submenu and press the Enter key to open it.

■If Legacy USB Support is disabled, press the space bar to enable it.

■Scroll down to SCSI SubClass Support and press the space bar to enable it.

7.Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process.

After you have changed the boot priority, you can restore a backup image when you are booting up.

Procedure

1.Turn on the power to your system.

2.Ensure that you have a device that can read DVDs either installed in your system or attached exter- nally to it.

3.Insert the Restore Disc into the drive tray.

4.Reboot your system.

WINDOWS VISTA USERS:

IMPORTANT NOTE - While the operating system is booting up during the restoration procedure, your screen will go blank for a short period of time. This is normal. During the period while your screen is blank, do

not press any buttons. Please wait for the

“Set Up Windows” screen to be displayed, then follow the instructions that appear.

5.After the system reboots, follow the instructions that appear to either restore your system image or erase all data from your hard disk.

USING THE SHOCK SENSOR UTILITY

The Shock Sensor Utility is designed to decrease the risk of damage to the computer's hard disk drive (HDD) in the event of excessive impact or vibration. The Shock Sensor Utility also has the ability to improve the security of the computer by automatically locking the computer with a password when it is carried. Note that the HDD protection and computer locking features are mutually exclusive; both cannot be selected at the same time.

■Shock Sensor Utility does not completely protect the HDD and does not provide absolute security for the computer.

■The computer may stop temporarily while the HDD head is retracted. To restart the computer, keep the system horizontal.

1.Double-click the Shock Sensor Utility icon in the Notification Area at the bottom-right of the screen. The [Shock Sensor Utility] window appears.

2.Click the [Setting] button. The [Shock Sensor Utility Settings] window appears.

Action

Select the action you wish this utility to perform:

■Protect HDD from impact. HDD head is retracted when an impact to the computer is detected.

■Lock computer when carried. Lock the computer when it is being carried.

■Nothing. No action.

Sensitivity of impact/horizontal move/fall/carry detection

Adjust the sensitivity of the acceleration sensor based on system motion or impact.

Ignore periodic vibration.

If vibration is periodic, disregard it.

Ignore mouse click

When the mouse is clicked, sensitivity is temporarily lowered.

Ignore keyboard action

When the keyboard is used, sensitivity is temporarily lowered.

Confirm calibration when user logs on

Select [Confirm calibration when user logs on] if you want to recognize the current orientation as horizontal at logon.

Perform calibration automatically when user logs on

Select [Perform calibration automatically when user logs on] if the system is normally used on a horizontal surface.

[Calibrate Now]

The calibration is executed. Please position the computer as horizontally as possible, then click the [Calibrate Now] button. The current horizontal position will be recognized as the true horizontal by performing the calibration.

3.Click the [OK] or [Cancel] button. The [Setup] window closes.

80