52
3.2 Adding a Card
When the system is started right after OS installation or new LAN card installation, the following
window may appear. Follow the instructions below.
• When the [Found New Hardware] message appears:
When an OS-installed LAN card driver is newly added automatically, [Insert Disk] dialog box may
appear to request inserting [Intel(R) PRO Adapter CD-ROM or floppy disk] or [Intel(R) PRO/
1000 Driver Disk]. In this case, click [Cancel] and install the driver referring to "3.1 Updating the
Driver" (Jpg.50).
• When [Welcome to the Found New Hardware Wizard] appears:
Click [Next] and go to step 8 in "3.1 Updating the Driver" (Jpg.50). It is not necessary to perform
step 13.
3.3 Removing the Driver
Perform the following procedures to remove the driver.
1Log on with the administrator privileges.
2Remove Intel® PROSet.
J"4.3 Uninstalling"(pg.55)
If "Intel® PRO Network Connections Software v10.3.32.2" is removed, all drivers are
removed. In this case, steps 3 to 6 are not required.
To remove Intel® PROSet in old version, select [Control Panel] - [Add/Remove Programs].
3Click [Start] → [Settings] → [Control Panel] → [Add or Remove
Programs].
4Select [Intel(R) PRO Network Connections Drivers] and click
[Change/Remove].
A confirmation message appears.
5Click [Yes].
The driver is uninstalled.
6Restart the system.
`If Intel® PRO Network Connections is removed, the LAN driver is removed together.