72
A.5 Replacement Procedure for Cards that
Configure Teams
When replacing LAN card that configures a team, perform the following procedures.
1After turning off the system power, replace the LAN card.
2Restart the system.
3Log on with the administrator privileges.
4Exit all running applications.
5Double click the LAN adapter to be used by Device Manager and
start Intel® PROSet.
J" How to Start Intel® PROSet"(pg.53)
6Open the property window of the virtual adapter in the team con-
taining the newly installed LAN adapter.
7Click the [Settings] tab.
8Select [Modify team].
The "Modify Team" windows appears.
When a confirmation message appears, click [OK] to continue.
• When priority is set, perform the following operations:
1. Select the adapter and click [Remove Priority].
2. Click [OK] to close the "Modify Team" window.
3. Click [Modify team].
4. Set as the original priority setting.
5. Click [OK] to close the "Modify Team" window.
6. Click [OK] to close the "Team Properties" window.
• When priority is not set, perform the following operations:
1. Select an adapter and click the [Set Primary].
2. Click [OK] to close the "Modify Team" window.
3. Click [Modify team].
4. Select an adapter with set priority, and click [Remove Priority].
5. Click [OK] to close the "Modify Team" window.
6. Click [OK] to close the "Team Properties" window.
9Restart the system.
`Normally, the Ethernet address in the initial window also displays the MAC address of
the LAN card, however, when a team configured card is used in the secondary side,
the MAC address of the card used for the Primary side is displayed.