60
5.2 Creating Team
Perform the following procedures to create a team.
1Log on with the administrator privileges.
2Double-click LAN adapters to create a team using device manager,
and start Intel® PROSet.
J" How to Start Intel® PROSet"(pg.53)
3Click the [teaming] tab.
4Select [team with other adapters] and, click [New Team].
The [New team Wizard] window appears.
5Enter a team name, and click [Next].
6Select LAN adapters to be teamed only, and click [Next].
The [Select team mode] window appears.
7Select the type of the team to create and click [NEXT].
• For AFT: "Adapter Fault Tolerance"
• For ALB: "Adaptive Load Balancing"
• For SFT: "Switch Fault Tolerance"
• For Static Link Aggregation: "Static Link Aggregation"
Do not select other types of team.
`When performing remote operation of the onboard LAN using the
RemoteControlService, uncheck onboard LAN (Onboard LAN cannot be built in
the team).
`When the following dialog box appears and remote operation of the onboard LAN
using the RemoteControlService is operated, click [No] and uncheck the onboard
LAN. When remote operation using RemoteControlService is not operated, click
[Yes].
8Click [Finish].
The property window of the created team appears.
9Click [OK] to close the property window of the team.
The property window of the LAN adapter appears.
When [This team contains a non-Intel adapter and therefore does not support Jumbo Frames.]
appears, click [Yes].