5 Teaming (AFT/ALB/SFT/Static Link Aggregation) 59
E
• When AFT/ALB/Static Link Aggregation is used, spanning tree function of the port connected to
the switch must be disabled.
• When adding/removing a LAN card to/from a team in Static Link Aggregation, it must be operated
while the link is down.
• For Static Link Aggregation, all adapters must operate at the same speed.
• With the teaming option, do not use Express Team.
• When performing remote operation of the onboard LAN using the RemoteControlService,
onboard LAN cannot be used for team members.
For details about RemoteControlService, refer to the "ServerView User's Guide".
• When operating onboard LAN RemoteControlService is set and teamed with onboard LAN,
remote operation using RemoteControlService does not function correctly.
• Onboard LAN of Broadcom with Intel® PROSet and teaming with Intel LAN card are available.
The followings are notes on teaming.
-For Intel
® PROSet, team cannot be configured only with Broadcom onboard LAN.
- When teaming Broadcom onboard LAN with Intel® PROSet, more than one port of Intel LAN
port must be built in the teaming.
- Broadcom onboard LAN models which cannot be built in the teaming with Intel® PROSet are
as follows.
• PRIMERGY RX300/PRIMERGY TX200
- During teaming, set the priority of the Intel LAN card to "Primary" (click [Modify team] from
the [Settings] tab).