OPERATION
To Select Mode Operation
1
2
Press the START / STOP button (Fig.6 M).
The indoor unit’s OPERATION indicator lamp (red) (Fig. 3 5) will light.
The air conditioner will start operating.
Press the MASTER CONTROL button (Fig.6 H) to se- lect the desired mode.
Each time the button is pressed, the mode will change in the following order.
sAUTO sCOOL s DRY |
|
FANt |
|
About three seconds later, the entire display will reappear. | Example: When set to COOL. |
|
To Set the Thermostat
Press the SET TEMP. / SET TIME buttons (Fig. 6 I).
,button: Press to raise the thermostat setting.
- button: Press to lower the thermostat setting.
●Thermostat setting range:
AUTO | 64 to 88 °F |
|
|
|
|
|
Cooling/Dry | 64 to 88 °F |
|
|
|
|
|
The thermostat cannot be used to set room temperature during the |
|
|
|
|
| |
FAN mode (the temperature will not appear on the remote control |
|
|
|
|
| |
unit’s display). |
|
|
|
|
|
|
|
|
|
|
|
| |
About three seconds later, the entire display will reappear. |
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
The thermostat setting should be considered a standard value, and may differ |
|
|
| |||
Example: When set to 86 °F. | ||||||
somewhat from the actual room temperature. |
|
|
|
|
|
To Set the Fan Speed
Press the FAN CONTROL button (Fig. 6 L).
Each time the button is pressed, the fan speed changes in the following order:
sAUTO s HIGH s MED | sLOW | sQUIET |
About three seconds later, the entire display will reappear.
When set to AUTO:
Cooling | : As the room temperature approaches that of the thermostat setting, |
| the fan speed becomes slower. |
Fan | : The fan runs at the low fan speed. |
| The fan will operate at a very low setting during Monitor operation |
| and at the start of the Heating mode. |
When set to QUIET:
SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for qui- Example: When set to AUTO. eter operation.
●SUPER QUIET operation cannot be used during Dry mode. (The same is true when dry mode is selected during AUTO mode operation.)
●Heating and Cooling performance will be reduced somewhat during SUPER QUIET operation.
To Stop Operation
Press the START/STOP button (Fig.6 M).
The OPERATION indicator lamp (red) (Fig. 3 5) will go out.