S Series.book Page 65 Thursday, February 19, 2004 4:52 PM

*Parity Check 2 nnnn

Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. This is a potentially data-destroying failure. Contact your support representative.

*Press <F1> to resume, <F2> to SETUP

Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2] key to enter Setup and change any settings.

*Previous boot incomplete – Default configuration used

Previous Power On Self Test did not complete success- fully. The Power On Self Test will load default values and offer to run Setup. If the previous failure was caused by incorrect values and they are not corrected, the next boot will likely fail also. If using the default settings does not allow you to complete a successful boot sequence, you should turn off the power and contact your support representative.

*Real time clock error

Real-time clock fails BIOS test. May require board repair. Contact your support representative.

*Shadow RAM Failed at offset: nnnn

Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data corrup- tion if you continue. Contact your support representative.

nnnn Shadow RAM Passed

Where nnnn is the amount of shadow RAM in kilobytes successfully tested.

*System battery is dead – Replace and run SETUP

The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change. You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your notebook. This battery has an expected life of 2 to 3 years.

System BIOS shadowed

System BIOS copied to shadow RAM.

*System CMOS checksum bad – run SETUP

BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in BIOS memory. Run Setup and reconfigure the system.

*System RAM Failed at offset: nnnn

System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact your support representative for repairs.

T r o u b l e s h o o t i n g

nnnn System RAM Passed

Where nnnn is the amount of system memory in kilobytes successfully tested.

*System timer error

The timer test failed. The main clock that operates the computer is faulty. Requires repair of system board. Contact your support representative for repairs.

UMB upper limit segment address: nnnn

Displays the address of the upper limit of Upper Memory Blocks, indicating released segments of the BIOS memory which may be reclaimed by a virtual memory manager.

Video BIOS shadowed

Video BIOS successfully copied to shadow RAM.

EMERGENCY MEDIA PLAYER

DRIVE TRAY RELEASE

If for some reason the eject button fails, you can open the DVD/CD-ROM tray with a paper clip or similar tool inserted into the eject hole in the far right side of the front of the tray. Straighten one side of a paper clip and push it gently into the hole. The tray will pop out a short distance.

MODEM RESULT CODES

The operating system and application software that is factory installed detects the modem characteristics and provides the necessary command strings to operate the modem. The internal modem operation is controlled by generic AT commands from the operating system and application software. The standard long form result codes may, in some cases, be displayed on your screen to keep you informed of the actions of your modem. The operating system and application software may suppress display of the result codes.

Examples of result codes are:

■OK

■NO CARRIER

■NO DIALTONE

■CONNECT 53000 (Connection complete at 53,000 bps.)

■ERROR

■FAX

■RING (This means an incoming call.)

■BUSY

■NO ANSWER

When using the internal modem with applications that are not factory installed refer to the application documentation.

65

Page 72 Page 74
Page 73
Image 73
Fujitsu S7010D manual Emergency Media Player Drive Tray Release, Modem Result Codes
Page 72 Page 74

S7010D specifications

The Fujitsu S7010D is a notable laptop that blends performance and portability, making it an ideal choice for professionals and casual users alike. This device showcases a robust design that is both compact and lightweight, facilitating easy mobility for users on the go. Its sleek profile and durable construction ensure that it can withstand the rigors of daily use, which is particularly appealing for users who travel frequently.

At the heart of the Fujitsu S7010D is a powerful processor, typically featuring Intel's Core series, which provides excellent performance for multitasking and handling demanding applications. The device is often equipped with ample RAM, which enhances its ability to run several applications simultaneously without lag. This performance backbone makes the S7010D suitable for both office tasks and more resource-intensive applications like graphic design or data analysis.

One of the standout features of the Fujitsu S7010D is its superior display quality. Equipped with a high-resolution screen, the laptop offers vibrant colors and sharp visuals that enhance the overall user experience. Whether streaming videos, working on detailed presentations, or browsing the web, the display quality elevates every task. Additionally, the viewing angles are optimized, ensuring that content remains vivid and discernible even from off-angles.

The S7010D also incorporates advanced connectivity options. With multiple USB ports, including USB 3.0 for faster data transfer, HDMI for connecting to external displays, and Ethernet for reliable internet access, this laptop can cater to a variety of connectivity needs. Wireless connectivity options, including Wi-Fi and Bluetooth, allow users to stay connected and transfer files seamlessly without the hassle of cables.

Security is a priority for the Fujitsu S7010D, as it often features biometric fingerprint recognition, ensuring that sensitive data remains protected. This is especially vital for business users who handle confidential information.

Battery life is another significant characteristic of the S7010D. With efficient power management features, users can enjoy extended usage without worrying about frequent recharging. This is beneficial for those who may find themselves away from power sources during the day.

In conclusion, the Fujitsu S7010D is a well-rounded laptop that caters to a diverse array of users. Its combination of performance, portability, and advanced features makes it an appealing choice for anyone in need of a reliable and robust computing device. Whether for work or leisure, the S7010D stands out as an exemplary representation of Fujitsu's commitment to quality and innovation in technology.
Top Page Image Contents