Device Ports

Your Fujitsu LIFEBOOK Tablet PC and the optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, printers, etc.

Internal LAN (RJ-45) Jack

The internal LAN (RJ-45) jack is used for a Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN connection. You may need to configure your Tablet PC to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps:

1Align the connector with the port opening.

2 Push the connector into the port until it is seated.

3 Plug the other end of the cable into a LAN outlet.

LAN Connector

Figure 43. Connecting the LAN

Port Replicator Connector

The port replicator connector located on the bottom of your system is used for the connection of your Tablet PC to an optional port replicator. (See Figure 6 for location). In order to connect your Tablet PC to this device, follow the instructions that came with your port replicator.

100 - Device Ports

Page 101
Image 101
Fujitsu T731 manual Device Ports, Internal LAN RJ-45 Jack, Port Replicator Connector