Fujitsu T731 manual Problem Possible Cause Possible Solutions

Problem	Possible Cause	Possible Solutions
LIFEBOOK Tablet PC fails	Optical drive tray is not	Push on the front of the optical drive tray until it latches. If
to recognize DVD/CD-	latched shut.	that doesn’t work, pull out the modular drive latch to remove
RW/CD-ROM’s.		the device from the bay, then re-insert the drive until it
		latched; this ensures that the drive is properly seated.
(continued)
	Wrong drive designator was	Verify the drive designator used by the application is the
	used for the disc in the appli-	same as the one used by the operating system. When the
	cation.	operating system is booted from a DVD/CD, drive designa-
		tions are automatically adjusted. Note that the drive designa-
		tion can be changed with the Disk Management tool located
		at Administrative Tools -> Computer Management.
	DVD/CD-RW/CD-ROM is dirty	Wipe the disc with a non-abrasive CD cleaning cloth and
	or defective.	reinsert. If it still will not work try another DVD/CD-RW/CD-
		ROM in the drive.
The drive access indicator	The Windows auto insertion	This is normal. However, you may disable this feature.
on the Status Indicator	function is active and is
Panel blinks regularly with	checking to see if a disc is
no disc in the tray or the	ready to run.
drive is not installed.
Port Replicator Problems

Note: Be sure to power down your LIFEBOOK Tablet PC before adding a printer to the Port Replicator parallel port.

Tablet PC does not turn on when installed in the optional Port Replicator

Port Replicator AC adapter is	Provide power to the Port Replicator.
not plugged in.
Tablet PC is not properly	Remove and re-dock your LIFEBOOK Tablet PC.
seated in the Port Replicator.

Hard Drive Problems

You cannot access your hard drive.

The wrong drive designator was used by an application when a bootable disc was used to start the Tablet PC.

Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are automatically adjusted.

110 - Troubleshooting