ADJUSTING THE PICTURE (Continued)
Making the Progressive Scan Settings
This sets the conversion processing of interlace signals to block receive signals.
•24 Frame Mode
This function enables the optimized display of movies, etc. with 24 frames/second signals. Each time Eor Fis pressed, the setting is switched.
Auto Off
Press <to store.
Progressive Scan Settings
Screen
•30 Frame Mode
This function enables the optimized display of movies, etc. with 30 frames/second signals. Each time Eor Fis pressed, the setting is switched.
Auto Off
Press <to store.
•Jaggies Filter
This function alleviates the phenomenon where jagged diagonal lines can be seen when interlace signals are input, thus enabling a smoother motion picture display.
Each time Eor Fis pressed, the setting is switched.
Auto Off
Press <to store.
•Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion picture priority setting. Press F: to specify still picture priority.
Press E: to specify motion picture priority. Press <to store.
Note
•The screen display disappears if there is no operation within approximately 60 seconds.
•Depending on the model or the optional devices, some of the functions may not be available.
•The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
