Color monitor 19T2
If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption. The power indicator of the monitor changes color to indicate the status change. If there is still no input, power consumption is further reduced (OFF mode).
Once an input is made at the PC the screen contents are redrawn and full power is restored.
The length of the individual stages is determined by the power management system of the PC. For detailed information on how
The service life of your monitor will be extended if the OFF mode is switched to after 30 i minutes at the earliest (setting in screen saver, in your PC's BIOS setup or in the OSD
menu).
When the monitor is switched to OFF mode by the power management system a power consumption of about 3 W is maintained to feed the circuit for redrawing the screen contents.
To cut off power consumption totally, press the ON/OFF switch on the front of the monitor.
Changing the monitor settings
With the buttons on the control panel, you can change the monitor settings. Most settings are carried out via an integrated OSD menu
The OSD menu is available in different languages. The English menu names are used in i the following description (default setting). How you set a different language for the OSD
menu is described in the section "Setting the language for the OSD menu (LANGUAGE)".
| 1 | 2 | 3 | 4 | 5 |
1 = | Factory settings button | 3 = Brightness/arrow up/down button | |||
2 = | Picture size/position button | 4 = | Menu button | ||
| (automatic setting) | 5 = Contrast/arrow left/right button | |||
The factory settings button 
(1) is used to reset the values to the factory settings.
With the picture size/position button 
(2) the screen display can be automatically adjusted so that it fits on the screen. This function is especially intended for computers with graphic user interfaces (software) which fills the entire screen.
The brightness/arrow up/down buttons 
(3) are used to set the brightness and to operate the OSD menu.
The menu button 
(4) switches the OSD menu on and off.
The contrast/arrow left/right buttons 
(5) are used to set the contrast and to operate the OSD menu.
English - 9 |
