Color monitor 19T2

Restore original monitor colors (COLOR RETURN)

After a number of years of operation the color brightness of your monitor may decrease slowly. With this function you can reset the monitor colors to manufacturer's default values. (Due to the natural aging process this function may no longer work after a certain period of time.)

Prior to being able to use this function, the monitor must have been in standard operation for at least 30 minutes (power indicator is green). If the monitor changes over into energy saving mode, switch it back to normal mode and wait for 30 minutes. You may have to change the energy saving settings of your computer in order to keep the monitor in standard operating setting for 30 minutes. If the monitor is not ready, a respective message will appear.

Press the button . While the original screen colors are being restored the screen remains dark. This process takes about 2 seconds.

Open Help menu (HELP)

The most frequent questions and problems are covered here.

?

Calling the HELP window

 

 

 

RETURN TO MAIN MENU

Return to main menu

 

 

RECOMMENDED RESOLUTION

Recommended resolution:

 

1280 x 1024 at 85 Hz

 

 

FLICKER

Flickering:

 

Display of current refresh rate and reference to recommended

 

refresh rate >75 Hz

 

 

THIN HORIZONTAL LINE

Thin horizontal line:

 

There is no malfunction.

 

 

DISTORTED SHAPE

Picture distorted:

 

Setting the picture geometry (GEOMETRY)

 

 

OUT OF FOCUS

Picture is blurred:

 

Setting convergence (CONVERGENCE)

 

 

DISCOLORATION

Discoloration:

 

Check data cable

 

degauss monitor (MANUAL DEGAUSS)

 

 

Activating the factory settings

With the factory settings button on the front of the monitor, either the adjustment of a selected function can be specifically reset to the factory setting, all settings for the current input signal can be reset or all input signals reset.

Resetting a selected function to the factory setting

ÊSelect the function in the OSD menu to be reset.

ÊPress the factory settings button .

14 - English

A26361-K616-Z100-2-5E19

Page 22
Image 22
Fujitsu Siemens Computers 19T2 manual Activating the factory settings, Open Help menu Help