Philips BL-C10 operating instructions Setting Home Position/Sensor Position/Preset Button

Operating Instructions

1.2.4Setting Home Position/Sensor Position/Preset Button

The home position, sensor position and 8 preset buttons can be registered. Preset buttons (1—4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4: Lower Right. These buttons can be changed (see page 20).

•Registered buttons are shown in blue.

•Unregistered buttons are shown in white.

When clicking each button, the image switches to the home/sensor/preset position. When restarted, the camera takes a home position. If the Lens Position When Triggered setting is set (see page 61), the camera takes a sensor position after the pyroelectric infrared sensor detects temperature differences.

Registering Home Position/Sensor Position

1.Click [Program].

•	[Program] switches to [Cancel].	Home ￿
	Click [Cancel] to quit without saving	Position
	changes.

2.Pan and tilt the camera to a desired position.

3.Click the home position button or the sensor position button.

4.Click [Save].

•When finished, "Success!" is displayed.

•Clicking [Back] takes you back to the previous page without changing the settings.

5.Click [Back].

•The bar switches to the operation bar.

Pan/Tilt

Program

Sensor ￿

Position

17