When you set E-mail for Transfer Method

When you set [E-mail] for Transfer Method

Select [E-mail], and click [Next>]. The following page is displayed.

•Clicking [<Back] takes you back to the previous page.

•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.

Note

The camera works only with an SMTP (Simple Mail Transfer Protocol) server. It does not work with mail servers like "Hotmail" using a web browser.

Setting	Description

SMTP Server IP	• If you set the server IP address, set 4 digits (0—255) and
Address or Host	3 periods such as "192.168.0.253". But "0.0.0.0" and
Name	"255.255.255.255" are not available. Or set a host name
	(1—255 characters).

POP3 Server IP	• If you set the server IP address, set 4 digits (0—255) and
Address or Host	3 periods such as "192.168.0.253". But "0.0.0.0" and
Name	"255.255.255.255" are not available. Or set a host name
	(1—255 characters).

Login ID*1	• If your ISP requires a login ID to log in to a POP3 server,
	set it (0—63 characters).

Password*1	• If your ISP requires a password to log in to a POP3 server,
	set it (0—63 characters).

Reply E-mail	• Set the sender's E-mail address. We recommend you to
Address*1	set the administrator's E-mail address.

Destination E-	• Set the destination E-mail address (up to 3).
mail Address*1
1—3