Operating Instructions
3.3FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button on the bottom.
2. Press the button with a pointed object.
1.Remove the 
cable cover. 
Pressing the FACTORY DEFAULT RESET button resets the camera to factory default. If you lose your user name and password, use this button to reset the camera.
•Press the FACTORY DEFAULT RESET button for 1 second when the camera is on.
•The indicator blinks orange, and then turns off for 10 seconds.
•Do not turn off the camera until the indicator lights green.
Notes
•The internal clock will not be reset, but the time format will return to AM/ PM mode (see page 36). Set it again.
•See page
•All buffered images are deleted when resetting the camera to factory default.
•The reset operation takes about 1 minute.
84
