Philips BL-C10 operating instructions Resetting the Camera to Factory Default

Operating Instructions

3.1.6Resetting the Camera to Factory Default

All camera settings are reset to factory default directly after the Execute button is clicked.

1.Click [Reset to Factory Default] on the Maintenance page.

2.Click [Execute].

•The indicator blinks orange, and then turns off for 10 seconds.

•All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default.

•If the camera is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure the camera seeing the Getting Started.

Notes

•The internal clock will not be reset, but the time format will return to AM/ PM mode (see page 36). Set it again.

•See page 85—page 92 for default settings.

•Pressing the FACTORY DEFAULT RESET button resets the camera to the factory default (see page 84).

•All buffered images are deleted when resetting the camera to factory default.

•The reset operation takes about 1 minute.

•Do not turn off the camera during the reset operation.

81