Philips BL-C10 operating instructions Setting Description

Operating Instructions

Setting	Description
Display	• Check the box to enable the camera.
IP Address*1 or	• Set the IP address or the host name to enable the camera.
Host Name*2
Port No.	• Set the port number (1—65535).
Camera Name*3	• This camera name is displayed only on the Multi-Camera
	page.

*1

*2

*3

Set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are not available.

Enter ASCII characters for the host name (see page 102). But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<] and [>] are not available.

Enter 1—255 characters.

Enter ASCII characters (see page 102) or characters in each language (1—15 characters for a 1-byte character and 1—7 characters for a 2-byte character). But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [:], [<], and [>] are not available.

Notes

•If your camera will only be accessed on your local network, use each camera's local IP address and port number.

•If you intend to access your camera from the Internet, you must use each cameras global IP address and respective port number.

4.Click [Save] when finished.

•New settings are saved.

•The Multi-Camera Setup page is displayed.

52