When you set FTP for Transfer Method | Philips BL-C10 instruction

When you set [FTP] for Transfer Method

Select [FTP], and click [Next>]. The following page is displayed.

•Clicking [<Back] takes you back to the previous page.

•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.

Setting	Description

Server IP	• If you set the server IP address, set 4 digits (0—255) and 3
Address or	periods such as "192.168.0.253". But "0.0.0.0" and
Host Name*1	"255.255.255.255" are not available. Or set a host name (1—
	255 characters).

Port No.	• Enter the number (1—65535). Usually set to 21.

Login ID*1	• If your ISP requires a login ID, set it (0—63 characters).

Password*1	• If your ISP requires a password, set it (0—63 characters).

Login Timing	• Select the login timing to an FTP server. If you set [One Time]
	during 1-minute transfer, the camera logs in to the server only
	once, and can reduce the time to log in or log out.

Upload File	• Set the file name to save on an FTP server. Enter 1—234
Name*1	characters. Entering "\" creates directories for a file. (E.g.
	NetworkCamera\image.jpg)

Overwrite	• Selecting [Overwrite File] saves and overwrites the image on
setting	the server. Selecting [Save as New File with Time Stamp]
	saves the image attaching time stamps on the file name, and
	the images are not overwritten.

Data	• Select [Passive Mode] normally. If FTP does not work, select
Transfer	[Active Mode] and check the operation.
Method

*1 But [Space], ["], ['], [&], [<] and [>] are not available.