Philips BL-C10 operating instructions Using Setup Program, Finding the camera

Operating Instructions

3.7Using Setup Program

The Setup Program can be used for the following purposes.

•Finding the IP address and port number of the camera connected to your network.

•Setting up the camera automatically.

•Setting up the camera manually to a Static or a DHCP setting.

•Displaying the Setup page.

Finding the camera

1.Connect the Ethernet cable to the camera following the Getting Started.

2.Insert the Setup CD-ROM into the CD-ROM drive of your PC.

•If the Network Camera Setup window does not appear, click "setup.exe" on the Setup CD-ROM.

3.Click [Camera Setup].

Displays version information about this program.

Sets up the camera.

Displays the camera manuals.

If your PC does not have Adobe® Acrobat® Reader, install it from the Adobe Reader website.

Installs Network Camera Recorder Trial Version.

Closes the Setup Program.

•You can find the camera IP address and port number by looking up the MAC address of your camera.

MAC ￿
Address		Port ￿Camera ￿
	IP ￿	No. Status
			Camera ￿
	Address
			List window

95