Philips BL-C10 Basic Network, To connect the camera to the network see, Camera, Account, Advanced

Operating Instructions

Basic
(1)	Network	Configures the network settings such as connection mode
		to connect the camera to the network (see page 29).
(2)	UPnP	Enables automatic port forwarding or shortcut to the
		camera (see page 33).

(3)Viewnetcam. Registers with the Viewnetcam.com service (see page 34). com

(4)Date and Time Sets the date and time, automatic time adjustment and adjust clock for daylight saving time settings (see page 36).

(5) Camera	Sets camera name, white balance, AC power source
	frequency and pan/tilt range (see page 38).

Account

(6) Administrator*1 Sets authentication setting and administrator security (user name and password) (see page 42).

(7) General User*1 Sets general user security (user name and password) and general user's feature restriction (see page 46).

Advanced

(8)Image Display Sets resolution, image quality and refresh interval of Single Camera and Multi-Camera page, limit continuous motion JPEG*1, and language (see page 48).

(9) Multi-Camera*1Sets the camera IP address or host name, camera name on the Multi-Camera page (maximum 12 cameras) (see page 51).

(10)Buffer/Transfer Sets image buffer or transfer by timer or sensor. (see page 53 or page 60).

(11)Operation Time Sets time period to display camera images (see page 70).

(12) Indicator	Sets indicator display (see page 72).
Control

(13)Privacy Mode Enables privacy mode (see page 73).

*1 If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi- Camera Setup page] settings, changes will not be applied to the video (Motion JPEG) viewers. Restart the camera to make changes applied to all video viewers.

28