Fujitsu Siemens Computers 19T2 manual VESA-DDC-compatible VGA interface, Preset operating modes

Color monitor 19T2

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor 19T2 is not yet displayed in the list of monitors, you can select one of the
	following monitors instead:
	Siemens or Siemens Nixdorf MCM 21T1, MCM 2106, MCM 212V

Preset operating modes

The display position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be

necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").

Horizontal frequency	Refresh rate			Screen resolution
31.5 kHz ± 0.5 %	70	Hz ±	0.5 %	720 x 400
31.5 kHz ± 0.5 %	60	Hz ±	0.5 %	640 x 480
53.7 kHz ± 0.5 %	85	Hz ±	0.5 %	800 x 600
63.9 kHz ± 0.5 %	100	Hz ±	0.5 %	800 x 600
68.7 kHz ± 0.5 %	85	Hz ±	0.5 %	1024 x 768
80.8 kHz ± 0.5 %	100	Hz ±	0.5 %	1024 x 768
93.1 kHz ± 0.5 %	100	Hz ±	0.5 %	1152 x 864
91.1 kHz ± 0.5 %	85	Hz ±	0.5 %	1280 x 1024
107.0 kHz ± 0.5 %	100	Hz ±	0.5 %	1280 x 1024
106.3 kHz ± 0.5 %	85	Hz ±	0.5 %	1600 x 1200

For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of 1024 x 1280 pixels.

A26361-K616-Z100-2-5E19 English - 17