Fujitsu Siemens Computers manual Removing the monitor base, Colour monitor B15-1

Colour monitor B15-1

Removing the monitor base

Before you can use a swivel arm or a wall bracket, you must remove the monitor base:

!The monitor surface is susceptible to scratching!

ÊSwitch off the monitor and pull the power plug out of the power socket.

ÊLay the monitor on its face on a soft surface.

ÊRemove the cover and disconnect all cables.

ÊRemove the screw on the rear of the monitor.

You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 75 mm hole spacing.

For instructions on how to mount the swivel arm or wall bracket, please see the documentation for the swivel arm or wall bracket.

A26361-K905-Z100-2-5E19 English - 17