Fujitsu Siemens Computers B15-1 manual VESA-DDC-compatible VGA interface, Preset operating modes

Colour monitor B15-1

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor B15-1 is not yet displayed in the list of monitors, you can select the
	following monitor instead:
	Fujitsu Siemens 3815 FA, 3814 FA, 382V, 381V
	Siemens or Siemens Nixdorf MCF 3511 TA, MCM 1405 ND

Preset operating modes

The picture position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be

necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").

The following are the most frequently used of the preset operating modes:

Horizontal frequency	Refresh rate	Screen resolution
31.5 kHz	70 Hz	720 x 400
31.5 kHz	60 Hz	640 x 480
37.5 kHz	75 Hz	640 x 480
37.9 kHz	60 Hz	800 x 600
46.9 kHz	75 Hz	800 x 600
48.4 kHz	60 Hz	1024 x 768
60.0 kHz	75 Hz	1024 x 768

For ergonomic reasons, a screen resolution of 1024 x 768 pixels is recommended. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz.

A26361-K905-Z100-2-5E19 English - 19