Fujitsu Siemens Computers manual Connecting cables to the monitor, Colour monitor B15-1

Colour monitor B15-1

Connecting cables to the monitor

The monitor ports are protected by a cover.

1 =	Cover	4 =	AUDIO-IN connector
2 =	Power connector	5 =	Headphones port
3 = D-SUB connector (ANALOG)

ÊRemove the cover (1).

The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the system unit.

ÊConnect one of the connectors of the data cable to the D-SUB connector on the monitor (3) and secure the plug-in connection by tightening the safety screws.

ÊInsert one plug of the audio line in the AUDIO IN (5) socket on the monitor and make sure it is properly engaged.

ÊPlug the power cable supplied into the power connector (2) of the monitor.

8 - English A26361-K905-Z100-2-5E19