Fujitsu Siemens Computers N3520 manual Boot Menu Selecting the Operating System Source

B o o t M e n u

BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE

The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.

						Quick Boot				CPU
					__ Boot Time Diagnostic				Screen
						Boot Menu				Intel(R) Pentium
				040M9AT00
				__		Pre-Boot Execution			Environment
				ITADVD-RAM UJ-831S						Speed:
										L1 Cache:
			x			Boot Sequence Setting				L2 Cache:
				FFFFh
							Figure 17. Boot Menu
Table 17: Fields, Options and Defaults for the Boot Menu
Menu Field	Options						Default	Description
QuickBoot	■				(Selected)			When selected, fewer Power On Self Tests are run in order to
	■	___ (Unselected)						speed up booting. When unselected, all Power On Self Tests are
								run. (Fewer tests mean faster turn on.)
Boot-time	■				(Selected)		___	Turns on and off display of test results instead of Fujitsu logo
Diagnostic	■	___ (Unselected)						screen during Power On Self Test.
Screen
Boot Menu	■				(Selected)			When unselected, access to the Boot Menu with the [F12] key is
	■	___ (Unselected)						disabled. When selected, the Boot Menu is enabled and the [F12]
								key will allow you to display it.
Preboot	■				(Selected)		___	Turns on and off the preboot execution environment feature.
Execution	■	___ (Unselected)
Environment
Boot Sequence		___					___	Opens the Boot Sequence Setting submenu.
Setting

17