Drive0 Clear | Fujitsu Siemens Computers P8010 specification

L i f e B o o k P S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.

		Phoenix TrustedCore(tm) Setup Utility
Info	System	Advanced		Security	Boot	Exit

	Hard Disk Security					Item Specific Help

Drive0:			Clear
Set Master Password			[Enter]
Set User Password			[Enter]
Password Entry on Boot:			[Enabled]

F1 Help	Select	Item
ESC Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Menu Field	Options		Default	Description


Drive0:	___		Clear	Display-only. Default is Clear. When the Drive0 Password has been set, the field
				changes to Set. When this password is set, the primary hard disk drive cannot be
				used in another system unless the password is entered.

Set Master	___		[Enter]	Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
Password				may be up to seven characters long and must include only letters or numbers (no
				symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set,
				it must be used to access the hard drive if it is used in another system. Note that the
				password will not take effect until the system has been rebooted.

Set User Password	___		[Enter]	Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
				be up to seven characters long and must include only letters or numbers (no sym-
				bols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it
				must be used to access the modular hard drive if it is used in another system. Note
				that the password will not take effect until the system has been rebooted.

Password Entry on	■	Disabled	[Enabled]	When set to disabled, entry of a Hard Disk Password is not required before OS boot.
Boot:	■	Enabled		(The hard disk is still password-protected without password entry.)