Fujitsu Siemens Computers S2210 manual Using The Media Player

The tabs in Application Panel Setup may not be in the same order as the buttons on your LifeBook notebook. Please select the tab you wish to change carefully.

In order to reconfigure a button to launch a different program, follow these steps:

1.On the Button Setting window, click the tab of the button you want to configure.

2.Ensure that the “Enable this button” check box is selected, then click [Application registration...].

3.You can either select an application from the Start menu, or select an application directly by clicking the “Select from Start Menu” or “Select directly” button, respectively.

4.Once you’ve selected an application, click [Next].

5.In the next window, you can select to play a sound when the application starts.

6.Click [Finish]. After this point, whenever you click the appropriate application button, the application to which you assigned it will start.

At the bottom of each application setup page are two selectable options. The first will enable/disable the button when your LifeBook notebook is in Standby mode, and the second will enable/disable the button when your LifeBook notebook is powered off. You can enable/disable either or both of these functions simply by clicking on the option.

When you have finished with Button Setting window, click on [OK], and the new settings will take effect. You can reconfigure your LifeBook Application Panel as often as you like.

If you choose to use the buttons when the notebook is in standby, they will function even if hit accidentally, and will turn on your notebook even if you are not present or using the notebook. This could deplete your battery, and you will need to recharge it before using the notebook.

USING THE MEDIA PLAYER

The media player allows you to use your LifeBook note- book’s optical drive as a media player.

■If you shut down from Windows while the media player is playing a disc, it will stop.

■You cannot go into Suspend Mode or Hibernation (Save-to-Disk) Mode while the media player is playing a disc.

■The media player will only play when the system is powered on.

G e t t i n g t o K n o w Y o u r L i f e B o o k

There is no configuration required for media player operation. The buttons are pre-configured to work like a normal media player. When the Mode switch is in the Player position, the buttons will operate as follows:

■Stop/Eject: Press it once to stop a disc that is playing. Press it twice to eject the disc.

■Play/Pause: Press this button to start playing a disc starting at the beginning. While the disc is playing, press it to pause. Press it again to continue.

■If you press the play button and nothing happens, you either have the Mode but- ton set on Application, there is no disc in

the drive, or the system is not powered on.

■Because of the Windows auto-insertion function, discs will start playing immedi- ately after they are inserted if your Life- Book notebook is on.

■Fast Backward: Press this button once to skip one track back.

■Fast Forward: Press this button once to skip forward one track.

21