Fujitsu Siemens Computers S2210 manual IEEE 1394 PORT, Headphone Jack, Microphone Jack

L i f e B o o k S 2 0 0 0 N o t e b o o k

Figure 4-18. Connecting a USB Device

IEEE 1394 PORT

The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard. The IEEE 1394 standard is easy to use, connect, and discon- nect. This port can allow up to 400 Mbps transfer rate. A third-party application is required to operate your digital device with the 1394 port.

The 1394 port used in this system uses a four-pin configuration. If you intend to interface with devices which use a six-pin configuration, you will need to purchase an adapter.

In order to connect a 1394 device, follow these steps:

1.Align the connector with the port opening.

2.Push the connector into the port until it is seated.(Figure 4-19)

Figure 4-19. Connecting an IEEE 1394 Device

HEADPHONE JACK

The headphone jack (Figure 4-20)allows you to connect stereo headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug.To connect headphones or speakers follow these steps:

1.Align the connector with the port opening.

2.Push the connector into the port until it is seated.

If you plug headphones into the headphone jack, you will disable the built- in stereo speakers.

Figure 4-20. Connecting Headphones

MICROPHONE JACK

The microphone jack allows you to connect an external microphone. Your microphone must be equipped with a 1/8”(3.5 mm) stereo mini-plug in order to fit into the microphone jack of your notebook. In order to connect a microphone follow these steps: (Figure 4-21)

1.Align the connector with the port opening.

2.Push the connector into the port until it is seated.

Figure 4-21. Connecting a Microphone

48