VCR Functions
Playback
Before:
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
VCR
1 Insert a video cassette | 2 | To start playback |
into this unit. |
|
|
|
| PLAY |
3 To stop playback | 4 | To eject the cassette |
|
| OPEN/CLOSE |
STOP |
| /EJECT |
|
|
|
|
| 4 | 1 |
| Hint |
|
|
|
| • When a tape without | ||
|
|
| OPEN/CLOSE |
|
| record tab is inserted, |
SPEED | AUDIO | /EJECT |
|
| the unit will start | |
|
|
|
|
|
| |
1 | 2 | 3 |
|
|
| playback automatically. |
|
|
| • Tracking will be | |||
|
|
| SKIP/CH. |
|
| |
4 | 5 | 6 |
| REC TIMER |
| automatically adjusted |
|
|
| ||||
|
|
| VCR/TV |
|
| |
7 | 8 | 9 |
|
| upon playback. | |
VIDEO | AUDIO | IR | ||||
|
|
| SLOW |
|
| To adjust the tracking |
| 0 | +10 |
|
|
| |
DISPLAY | VCR | DVD | PAUSE |
|
| manually, press [SKIP/ |
2 |
|
|
| 3 2 |
| CH. G/K, H/L] (or |
| PLAY |
|
| [CHANNEL K/L]) dur- | ||
| STOP | 3 | 4 |
| ing playback. | |
Other Operations
To cue or review picture during playback (Picture Search)
Use [g] or [h]([F.FWD g] or [REW h]).
•Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the picture will be forwarded by one frame.
•If the picture begins to vibrate vertically in the still mode, stabilize the picture by using [SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
•If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV if equipped.
Counter Reset
Press [CLEAR/C.RESET].
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
•If the noise bars appear on the TV screen, you can reduce it by using [SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
Auto Rewind
When a tape reaches its end during playback,
Hint
•Still/Slow mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.
•To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].
Index Search
You can skip the program backward and forward by the Index Mark.
VCR
• Insert a tape into this unit.
1Press [SEARCH MODE] once.
SEARCH
MODEINDEX SEARCH
– –
2To select Index Mark
INDEX SEARCH 0 3
Time Search
You can search backward and forward a specific length of time on a tape.
VCR
• Insert a tape into this unit.
1Press [SEARCH MODE] twice.
SEARCH | TIME SEARCH |
MODE | |
|
2Select the desired length of time for fast forwarding or rewinding.
TIME SEARCH
VCR Functions
or | 01 ~ 20 |
| CURRENT PROGRAM |
Beginning | End of |
or
2 : 5 0
0:01~ 9:59
| of the tape |
|
|
| the tape |
| Pro.1 Pro.2 | Pro.3 | Pro.4 | Pro.5 | |
| 02 | 01 | 01 | 02 | 03 |
|
|
|
| INDEX MARK | |
3 | To rewind |
|
|
|
|
|
|
| ss |
|
|
| To fast forward |
|
|
|
|
|
|
| BB |
|
|
4 | After searching, it automatically | PLAYB |
|
|
|
| starts playback. |
|
|
|
|
Hint
•The Index Mark will be made automatically at the beginning of each recording.
•The time gap between Index Marks should be greater than 1 minute for SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.
(1 minute~9 hours and 59 minutes)
3To rewind
ss
To fast forward
BB
4After searching, it automatically starts playback.
PLAYB
Hint for Index Search & Time Search
•These functions are not available during recording.
•Press [STOP C] to stop the search.
•If a tape ends during a search, your search will be canceled and the tape will rewind to the beginning.
– 11 – | EN |
E8C1UCD_EN.indd 11 | 2007/04/03 9:49:04 |
