Repeat / Random / Programmed Playback
DVD Functions
Repeat Playback
DVD
Repeat function is available only during playback.
1
PLAY
CHAPTER
REPEAT
<Example : DVD>
Each time you press [REPEAT], repeat function changes as example below.
OFF | (repeat off) |
CHAPTER (current chapter repeat)
TITLE (current title repeat)
OFF | (repeat off) |
TRACK (current track repeat)
ALL | (entire disc repeat) |
OFF | (repeat off) |
TRACK (current track repeat)
GROUP (current group repeat)
ALL | (entire disc repeat) |
Hint
•Repeat setting (except “ALL”) will be cleared when moving to another title, chapter, track or group.
•Repeat playback may not function with some discs or during repeat
Repeat A-B Playback
DVD
1
PLAY
A-
at your desired starting point (A)
2
at your desired ending point (B)
•Point B should be in the same title or track as point A.
Hint
•To exit the sequence, press
•To cancel Point A, press [CLEAR/C.RESET] at step 1.
•This function does not work in the other repeat modes.
Random Playback
DVD
This function shuffles the playing order of chapters or tracks instead of play- back in sequence.
1Press [MODE] once during stop mode.
MODE |
|
|
|
| NORMAL RANDOM PROGRAM |
| |
|
|
|
|
• During playback, press [MODE].
CD/MP3: | twice |
DVD: | three times |
2Select “RANDOM”. Then press [ENTER].
ENTER |
| ENTER |
|
|
|
The RANDOM playback will start.
Hint
•During random playback, you cannot go back to the previous track, using [SKIP/CH. G/K] allows you to search chapters or tracks randomly.
•During DVD Random Playback, you can play chapters in the current title randomly.
•Some DVD discs will not allow you to set random playback.
Programmed Playback
DVD
You may determine the order in which chapters or tracks will play.
1Press [MODE] once during stop mode.
MODE | NORMAL RANDOM PROGRAM |
• During playback, press [MODE].
CD/MP3: | twice |
DVD: | three times |
2Select “PROGRAM”. Then press [ENTER].
|
| ENTER |
|
|
|
| ENTER |
|
| ||
|
|
|
|
|
| MAX: | 2 | ||||
1 | 2 | 3 | Total: 3 TITLE | CHAPTER | PLAY | ALL CLEAR | |||||
|
|
|
|
|
|
|
| ||||
4 | 5 | 6 | 02 | 007 | |||||||
05 | 005 | ||||||||||
|
|
| |||||||||
7 | 8 | 9 | 01 | 002 | |||||||
| 0 | +10 | |||||||||
| |||||||||||
|
|
| |||||||||
<Example : DVD>
•Up to 20 chapters or tracks can be programmed.
•Enter the desired number with the number buttons.
DVD: title and chapter number
CD: track number
MP3: folder and track number
3Select “PLAY”,
then press [ENTER].
ENTER |
| ENTER |
|
|
|
Hint
•To erase all programs at once, select “ALL CLEAR’’ and press [ENTER] or press [CLEAR/C.RESET] at step 2.
•If the title, chapter, folder, track number is incorrect, the programmed number you entered will be skipped during programmed playback.
•While a program is being played back, [STOP C] works as follows;
⇒Press [STOP C] and [PLAY B] next, so that the programmed playback restarts.
⇒Press [STOP C] twice and [PLAY B] next, so that playback restarts from the first track in the original order. However, your programmed playback can be restarted when you follow the above steps. (Your programs are still stored until either the disc is removed or the power is turned off.)
•Some DVD discs will not allow you to set programmed playback.
•During program playback, you cannot setup “ 
TITLE’’ (DVD), “ 
GROUP’’ (MP3).
– 18 – | EN |
E8C1UCD_EN.indd 18 | 2007/04/03 9:49:19 |
