FUNAI LC320EMX owner manual 5Control Panel, Terminals

INTRODUCTION

5Control Panel

1

2

3

4

5

6

7

1.VOLUME K/L (p. 14)

Press to adjust the volume or move right (K) / left (L) through the main menu items.

2.SETUP (p. 13)

Press to display the main menu.

3.CHANNEL K/L (p. 14 / p. 15)

Press to select channels or move up (K) / down (L) through the main menu items.

4.POWER (p. 13)

Press to turn the unit on and off.

5.infrared sensor window

Receives infrared rays transmitted from the remote control.

6.POWER ON indicator

Lights up green when power is on.

7.STAND BY indicator

Lights up red when power is off.

5Terminals		[Side Panel]
		8. S-video input jack (p. 10)
		S-video cable connection from an external device.
8		9. video input jack (p. 11)
9		RCA video cable connection from an external
		device.
10
		10. audio input jack (p. 10 / p. 11)
		RCA audio cable connection from an external
		device.
11		11. HDMI 2 input jack (p. 8 / p. 9)
		HDMI connection from HDMI device.
		[Rear Panel]
*	12	12. AC power cord (p. 12)
		Connect to a standard AC outlet to supply power to

13this unit.

13.cable management (p. 12)

				Use this holder to bundle the cables.
			14	14. component video and audio input jack (p. 8 / p. 10)
				RCA component video cable and RCA audio cable
				connection from an external device.
19				15. audio output jack (p. 11)
20				RCA audio cable connection for an external device.
		15		16. audio input jack for HDMI 1 (p. 9 / p. 12)
				RCA audio cable connection from a DVI device.
			16
				When you connect your PC that has a DVI terminal,
17
				use a stereo mini plug-RCA conversion cable as well.
18				(For HDMI 1 input jack only)
				17. digital audio output jack (p. 11)
				Coaxial digital cable connection for a decoder or an
	Note:			audio receiver.
	* service terminal (service use only)			18. antenna input jack (p. 8)
	• Use this terminal only when a software update is necessary.			RF coaxial cable connection for your antenna or cable
	• User should not connect any devices to the service terminal such			TV signal.
	as digital camera, keyboard, mouse, etc. (because these will not			19. HDMI 1 input jack (p. 8 / p. 9 / p. 12)
	work).			HDMI connection for HDMI or DVI device.
	• The software update is, in most cases, handled by an authorized
	service person or in some circumstances the user may be asked			When you connect your PC that has a DVI terminal,
6	to do the software upgrade themselves.			you can enjoy this unit as a PC monitor.
				20. HDMI 3 input jack (p. 8 / p. 9)
	EN			HDMI connection from HDMI device.