FUNAI ZV450TT8 owner manual Timer Recording

TIMER RECORDING

	Use [K / L / { / B] or [the Number							7
	buttons] to enter the start and end
4 time, then press [B].
			Date	Start			End
		JAN/02		12	: 00AM	- - : - -
			CH	REC To		Speed
		DTV125- 1		DVD			2H
						2H	2 : 00
	Use [K / L / { / B] to select analog
	(“- - -”) / digital (“DTV”) mode or
5 external input (L1 / L2), then press [ B].
			Date		Start		End
		JAN/02		12 : 00AM		1 : 00AM
			CH	REC To		Speed
		L1			DVD		2H
						2H	1 : 00

Use [K / L] to select a recording speed.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Speed
DTV125- 1	DVD		2H
		2H	1 : 00

Refer to “Recording Speed” on page 43 for DVD or “Recording” on page 93 for VCR.

•You can check the remaining recordable space of the disc when you select the recording speed.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Speed
DTV125- 1	DVD		2H
		2H	1 : 00

To record from external input (e.g., cable/

Press [ENTER] when all items are

satellite box), select L1 or L2.

entered.

Use [K / L] to select the channel number to

Your program setting will be stored.

record.

8 • To set another program, repeat steps 2 to 7.

For digital mode, select both major and minor

• To exit, press [TIMER PROG.] or [SETUP].

channels. Refer to “How to select a channel

• When 2 or more programs are overlapped,

number for the timer recording” on this page

for more details.

“Timer program overlapped” appears, and the

e.g.) analog mode

overlapped program will be displayed in blue.

To correct the timer program refer to

“Checking, canceling, or correcting the timer

Date

Start

End

JAN/02

12 : 00AM

1 : 00AM

programming information” on page 48.

CH

REC To

Speed

10

DVD

2H

2H

1 : 00

Press [T-SET] to set a timer

e.g.) digital mode

programming.

Date

Start

End

will appear on the front panel display, while this

JAN/02

12 : 00AM

1 : 00AM

CH

REC To

Speed

9 unit waits to make the recording.

DTV

125

- 1

DVD

2H

2H

1 : 00

BS CS DR

CD

HDD

6

Use [K / L] to select a recording media

DVD

(“DVD” or “VCR”), then press [B].

"VCR” will appear if VCR timer recording have

been set.

Date

Start

End

JAN/02

12 : 00AM

1 : 00AM

CH

REC To

Speed

DTV125- 1

DVD

2H

2H

1 : 00

How to select a channel number for the timer recording

Analog TV

For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the

channel will be decided as soon as you enter the channel number.

Analog CATV

For channel number 1-12, press [B] or [ – ] to decide the channels. For other channels (13-125),

the channel will be decided as soon as you enter the channel number.

Digital TV

For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the

channel will be decided as soon as you enter the channel number.

Digital CATV

For channel number 1-13, press [B] or [ – ] to decide the channels. For other channels (14-135),

the channel will be decided as soon as you enter the channel number.

minor channels

For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the

channel will be decided as soon as you enter the channel number.

<Hint>

•You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number. e.g.) “5”: [0]+[5]

•For selecting the channels with [K / L], you need to press [B] or [ – ] to decide the channel number.

•For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed. [K / L] does not skip the non-existed minor channels.

EN 47

DiscFunction Introduction Connections Basic Setup Management Recording Playback Editing Setup VCR Functions Others Español