FUNAI ZV450TT8 Dubbing Mode, Press DVD, Press Dubbing, Press Stop C to stop the recording

DUBBING MODE

VCR to DVD DVD to VCR

Use [K / L] to select “VCR				DVD”,	Use [K / L] to select “DVD			VCR”,
4 thenGeneralpressSetting		[ENTER].			4 thenGeneralpressSetting		[ENTER].
Playback					Playback
Display		Auto Chapter			Display		Auto Chapter
Video		Auto Finalize			Video		Auto Finalize
Recording		Aspect Ratio (Video mode)			Recording		Aspect Ratio (Video mode)
Clock	Dubbing Mode				Clock	Dubbing Mode
	VCR	Dubbing Mode				VCR	Dubbing Mode
Channel		DVD	Compatible		Channel		DVD
							Make Recording Compatible
Reset All	DVD	VCR			Reset All	DVD	VCR

Introduction Connections Basic Setup

5Press [SETUP] to exit. Press [VCR].

6Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording.

•Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds when selecting the starting point.

7 Press [DVD ].

Make sure to select a recording speed using [REC SPEED].

8 Press [DUBBING].

VCR to DVD duplication will start.

9 Press [STOP C] to stop the recording. Title list will automatically appear.

• If you want to watch the duplicated material after the VCR to DVD duplication, press [TOP MENU] first then press [ENTER] twice.

5Press [SETUP] to exit. Press [DVD ].

6Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording.

7	Press [VCR ].
	Make sure to select a recording speed using
	[REC SPEED].

8 Press [DUBBING].

DVD to VCR duplication will start.

9Press [STOP C] to stop the recording.

DiscFunction Management Recording Playback Editing Setup

Note

•When you turn off the unit after setting the dubbing mode to DVD VCR, the setting will be set to VCR DVD automatically.

•You cannot change the output mode during VCR to DVD or DVD to VCR duplication.

For Audio CD to VCR duplication:

•This function is available on Audio CD, not MP3 files.

For VCR to DVD duplication:

•After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to playback the cassette tape until the picture is stabilized, then set the starting point which you wish to start recording, and start VCR to DVD duplication.

•The playback sound mode is followed by the setting of VCR playback sound mode on page 95. Set the playback sound mode to which you wish to record to the DVD.

•This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR to DVD duplication.

•Dubbing indicator will appear on the front panel display during dubbing.

EN 53

VCR Functions Others Español