FUNAI ZV450TT8 owner manual Functional Overview, Rear Panel, 11 10

FUNCTIONAL OVERVIEW

Rear Panel

1							2
							OUT
	DVD				DVD/VCR
DIGITAL	AUDIO S-VIDEO		COMPONENT	S-VIDEO IN ---AUDIO---OUT
AUDIO OUT	OUT		VIDEO OUT
			Y		L	L	IN
			PB			ANTENNA
	L	OUT		IN	R	R
			/CB
COAXIAL					IN ---VIDEO---OUT
	R		PR
			/CR
12	11 10 9			8 7 6 5		4		3

Introduction Connections Basic Setup

1.AC Power Cord (DVD/VCR)

Connect to a standard AC outlet to supply power to this unit.

2.ANTENNA OUT jack (DVD/VCR)

Use to connect an RF coaxial cable to pass the signal from the ANTENNA IN to your TV.

3.ANTENNA IN jack (DVD/VCR) Use to connect an antenna.

4.AUDIO OUT jacks (DVD/VCR)

Use to connect a TV monitor, AV receiver or other device with a RCA audio cable.

5.VIDEO OUT jack (DVD/VCR)

Use to connect a TV monitor, AV receiver or other device with a RCA video cable.

6.VIDEO IN jack (L1) (DVD/VCR)

Use to connect external device with a RCA video cable.

7.AUDIO IN jacks (L1) (DVD/VCR)

Use to connect external device with a RCA audio cable.

8.S-VIDEO IN jack (L1) (DVD/VCR)

Use to connect the S-video output of external device with an S-video cable.

9 . COMPONENT VIDEO OUT jacks (DVD only)

Use to connect a TV monitor with component video inputs with a component video cable.

10.S-VIDEO OUT jack (DVD only)

Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable.

11.AUDIO OUT jacks (DVD only)

Use to connect a TV monitor, AV receiver or other device with a RCA audio cable.

12.COAXIAL DIGITAL AUDIO OUT jack (DVD only)

Use to connect an AV receiver, Dolby Digital decoder or other device with a coaxial digital input jack with a digital coaxial cable.

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

•This unit does not have the RF modulator.

DiscFunction Management Recording Playback Editing Setup VCR Functions Others Español

EN 11