Sharp MD-MS702, MD-R2 operation manual Maintenance, Specifications, Cleaning, General

MAINTENANCE

■Cleaning

When the unit becomes dirty

Clean it with a soft cloth.

When the unit is excessively dirty, use a soft cloth dampened in water.

(External surfaces only)

Clean the headphone plug and the RCA cord plug.

This will prevent noise.

Notes:

●Do not use chemicals for cleaning (gasoline, paint thinner, etc.)

It may affect the quality or color.

●Do not apply oil to the inside of the unit. It may cause malfunctions.

SPECIFICATIONS

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

■ General

Power source:	DC 3.6V (rechargeable lithium-ion battery x 1)
	DC 5V (AC adaptor)
	AC 120V, 60 Hz
	DC 3V:	Optionally available battery case, AD-M70BC
		(commercially available, “AA” size, alkaline
		battery x 2)
	DC 4.5V: Optionally available car adaptor, AD-CA20X
		(for cars with a 12-24V DC negative ground
Power consumption:		electrical system)
	0.15 A (AC adaptor)
Output power:	4 W
	RMS; 20 mW (10 mW + 10 mW)
Charging time:	(0.2% T.H.D.)
	Approx. 2.5 hours
Battery life:	(When using the AC adaptor included with the unit)
When using the recharge-	When using two, commercially		When using two, commercially
able battery (fully	available, high capacity, “AA”		available, high capacity, “AA”
charged) included with	size, alkaline batteries (in the op-		size batteries with the recharge-
the unit	tionally available battery case)		able battery (fully charged)
Continuous recording:	Continuous recording:		Continuous recording:
Approx. 3.5 hours	Approx. 4 hours		Approx. 7.5 hours
Continuous play:	Continuous play:		Continuous play:
Approx. 5 hours	Approx. 8 hours		Approx. 13 hours

40

MD-MS702