Sharp MD-R2, MD-MS702 operation manual MiniDisc Recorder

●The continuous recording time is for analog inputs when the volume level is set to “VOL 0”.

●The continuous play time shows the value when the volume level is set to “VOL 15”.

●The above values are the standard values when the unit is charged and used at an ambient temperature of 68˚F (20°C).

●The operating time when using alkaline batteries may be different, depending on the type and manufacturer of the batteries, and on the operating temperature.

Input sensitivity:	Recording level		Reference input level			Input impedance
	MIC H		0.25 mV				10 k ohms
	MIC L		2.5 mV				10 k ohms
	LINE		100 mV				20 k ohms
Output level:
			Specified		Maximum			Load
			output		output level			impedance
	Headphones		—	10 mW + 10 mW				32 ohms
	LINE		300 mV		—			50 k ohms
			(-12dB)
Dimensions:
	Width:	3-7/16" (87.0 mm)
	Height:	1-3/16" (29.4 mm)
Weight:	Depth:	3-7/32" (81.5 mm)
	0.49 lbs. (219 g) with rechargeable battery
Input jack:	Line/optical digital, microphone (powered by the main unit)
Output jack:	Headphones (impedance: 19 ohms)/
	remote control unit

■MiniDisc Recorder

Type:	Portable MiniDisc recorder
Signal readout:	Non-contact, 3-beam semi-conductor laser pick-up
Audio channels:	Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response:	20 – 20,000 Hz (± 3 dB)
Rotation speed:	Approx. 400 – 900 rpm
Error correction:	ACIRC (Advanced Cross Interleave Reed-Solomon Code)
Coding:	ATRAC (Adaptive TRansformed Acoustic Coding), 24-bit
Recording method:	computed type
	Magnetic modulation overwrite method
Sampling frequency:	44.1 kHz (32 kHz and 48 kHz signals are converted to
	44.1 kHz, and then recorded.)
Wow and flutter:	Unmeasurable (less than ±0.001% W. peak)

41

MD-MS702