Track name, If an incorrect letter is entered

5 When the letter you want is displayed, press the 4 button.

●To enter more letters in the name, repeat steps 3 - 5.

6 When the disc name has been completely entered, press the ENTER/F.PLAY/SYN- CHRO button.

5
	6

Lights up

Position where the next letter will be entered

■Track name

Up to 100 characters can be entered for each name.

1 Play the track which you want to name, and press the 06button.

●The unit will enter the pause mode.

2 Press the EDIT/A. MARK/TIME MARK button to select “Tr NAME”.

●When “Tr NAME” is selected while in the stop mode, track numbers can be changed using the 5 or 4 button.

If an incorrect letter is entered:
If an incorrect letter is entered:	1	2
To erase a character:	1	2
To erase a character:
Press the 5 or 4 button to move the
cursor to the character you want to erase,
and then press the BASS/DEL button.

Press the 5 or 4 button to move the cursor to the character you want to correct, and then enter the correct character.

●Even after all the letters have been entered, you can still go back and cor- rect any mistakes.

Enter capital letters as described in step 4 and press the DISPLAY button to change them to the lowercase letters.

If you press this button again, the letters will be changed back to capital letters.

Press the + or – button to select “SPACE”. Then, press the 4 button to enter a space.

Track number that you want to give a track name

3 Press the ENTER/F.PLAY/SYNCHRO button.

●The unit will enter the character input mode.

●To cancel the operation, press the ■/:OFF button.

4 Perform steps 3 - 5 in the “Disc name” section.

5 When the track name is completely entered, press the ENTER/F.PLAY/ SYNCHRO button.

Type of							Characters <symbols>
characters		(They are selected using the + or – button.)

Capital letters		A	B	C	D	E	V	W X Y	Z
	0	1	2	3	4	5	8	9		Returns to .


Symbols		/ ' . ,				– + : ( ) & < >
	!	?	;	"	#	$	% * = @	_ `		Returns to .

indicates a space.

MD-MS702