Recording Using the Cable Included with the Unit | Sharp MD-MS702

RECORDING USING THE CABLE INCLUDED WITH THE UNIT

■Recording from CDs or MDs (Synchro recording)

●Synchro recording is a method that detects the playback sound from the source equipment. When sound is present, it automatically starts the recording. When the source is silent, the recording will be paused.

1 Connect the external equipment. (See page 8.)

2 Insert a recordable MiniDisc.

3 Press the REC button.

●To record from a tuner, first tune in a broadcast.

●To record from a CD, first start playing the track you want to record.

4 While playing sound from the external equipment connected to this unit, press the 5 or 4 button to adjust the recording level.

0dB -4dB

●Adjust the recording level so that the maximum sound volume from the source makes the reading swing some- where between -4 dB and 0 dB.

●To record from a CD, first adjust the recording level. Then put the equip- ment connected to this unit into the playback stand-by mode.

5 Press the ENTER/F.PLAY/SYNCHRO button.

Flashing

6 Begin playback on the source equip- ment.

●Recording will begin automatically.

To interrupt recording:

●When the source equipment is stopped, the unit will enter the synchro recording stand-by mode. When playback is resumed, a recording will be resumed.

●If a silence lasts for 3 seconds or more, the recording will be paused.

●Pressing the 06 button on this unit (when in this mode) will cause the unit to enter the recording stand-by mode and cancel the synchro recording mode.

Continued on the following page.

10

MD-MS702

Image 11

Sharp MD-MS702, MD-R2 Recording Using the Cable Included with the Unit, Recording from CDs or MDs Synchro recording

Contents

MD-MS702 Introduction ContentsAccessories Special Notes For Your Records Precautions PrecautionsVolume setting Concern for others when Listening to MiniDiscs Remote control unit Names of Controls and Indicators Main unit 25 26 Rechargeable battery power Power Source AC power Alkaline battery power Digital recording Before RecordingType of recording Analog recording Playback-only MiniDisc Recordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally To interrupt recording Recording Using the Cable Included with the UnitRecording from CDs or MDs Synchro recording Recording from a tuner or a CD Manual recording To stop recordingAfter recording To remove the MiniDisc Manual recording Recording Using AN Optionally Available Digital CableThere are cases where digital recording may be impossible Start recording Synchro recording Recording from the microphone Mic synchro recording Recording Using a Microphone To interrupt a recording To interrupt a synchro recordingRecording from the microphone Mic manual recording About the timed auto mark When the timed auto mark setting has been changedConvenient Recording Function To start recording from Middle of an existing track Recording tracks as a single trackMaking a track number automatically To create your own track numbers while recording Double time recording in monaural modeTo check the remaining disc time To erase all of the tracks at once To erase tracks To erase tracks one at a time About Track Numbers When recording from digital inputs CDs/MiniDiscs only About the TOC About TOC recording When is the TOC recorded? Playing a Minidisc Playback does not start when a MiniDisc is inserted To stop playback To turn off the powerTo interrupt playback To re-start the track being played Convenient Playback FunctionsCue and review To move to the beginning of the next track To interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play To check individual track names one by one To check the elapsed time and remaining time of the track Name/stamp EditingWhat the editing function can do Disc/Track name Divide Move To combine two non-contiguous tracks When one or both tracks to be combined have a nameCombine Disc name If an incorrect letter is entered Track name To add characters To change track names or disc namesTo change characters To delete charactersPage Listening through a car stereo Using with Other EquipmentListening through commercially available headphones To prevent the unit from being operated by mistake Convenient Operation FeaturesChecking the remaining amount of battery charge How to read the battery indicator To turn off the display backlight While in the stop modeTo eliminate the confirmation Sound About the sound skip guard memory To cancel the auto-play functionTo cancel the auto power save function About the auto power save function Troubleshooting What is a MINIDISC? If trouble occurs Minidisc System Limitations Batt Empty Error Messages General MaintenanceSpecifications Cleaning MiniDisc Recorder Memo Limited Warranty