PLAYING A MINIDISC
Headphones |
| |
For the | For the | VOL / |
left (L) | right (R) | NAME |
|
| BASS/DEL |
| To the |
|
| jack |
|
| Remote | BASS |
| control unit |
|
1 Insert the headphones plug firmly into the headphones jack on the remote control unit.
2 Plug the remote control unit into the 
jack on the main unit. Push the plug
all the way in.
●Since the remote control unit plug has only one correct orientation, plug it in as shown in the drawing.
3 Load a MiniDisc in the direction indi- cated by the arrow on the MiniDisc, with the label side facing up. (Insert the MiniDisc firmly, until a click is heard.)
●The power will be turned on automat- ically, and playback will start from the first track.
Track number
●When the recordable MiniDisc write protection tab is closed (page 9)
●When the
4 Press the + button to increase the volume and the - button to decrease the volume.
Volume (0 - 30)
5 Adjust the bass level.
Each time the BASS/DEL button is pressed, the tone will be switched as follows:
Track name
(Nothing will be displayed for MiniDiscs that do not contain track names.)
●After playback of the last track has finished, the unit will stop automatically.
Playback does not start when a MiniDisc is inserted:
Press the 06 button.
In the following cases, the
BASS 1 Bass sounds are emphasized slightly.
BASS 2 Bass sounds are emphasized more.
BASS 3 Bass sounds are emphasized even more. BASS OFF Bass emphasis is canceled.
●When recording, it is impossible to ad- just the bass level (Bass emphasis is canceled).
●The most recent volume or bass set- tings are saved when the power is turned off.
21
