POWER SOURCE

This unit can be used with 4 different power sources: a rechargeable battery, an AC adaptor, an optionally available battery case (AD-M70BC), and an optionally available car adaptor (AD-CA20X).

1

 

 

 

2

 

 

Mark

5

:OFF

 

 

DC IN 5V

 

 

 

To the

 

Insert

 

DC IN 5V

securely,

jack

 

all the

4

 

 

way in.

 

 

 

AC 120V, 60 Hz

 

 

 

To an AC outlet

■Rechargeable battery power

When the rechargeable battery is used for the first time or when you want to use it after a long period of non use, be sure to charge it fully.

1 Open the rechargeable battery com- partment cover.

2 Insert the rechargeable battery.

●Insert the side with the arrow first.

3 Close the rechargeable battery com- partment cover.

4 Plug the AC adaptor into the AC outlet, and then insert the plug on the AC adaptor cord into the DC IN 5V jack.

5 Press the ■/:OFF button twice to begin charging.

●“ ” will appear, and the battery will begin charging.

●Battery charging will be complete in 2.5 hours. When the charging is com-

plete, “ ” will go out.

Notes:

●After charging is complete, the AC adaptor may be left connected. (For ex- ample, when charging at night)

●The battery will not be charged when- ever the power to the main unit is turned on.

●If the AC adaptor is removed from the main unit or from the AC outlet while

charging, “ ” will not disappear for about 1 minute. This is normal.

●Do not force open the rechargeable battery door too far.

●Do not attach the optionally available battery case when charging the internal battery.

6

MD-MS702

Page 7
Image 7
Sharp MD-MS702, MD-R2 operation manual Power Source, Rechargeable battery power