6 When a sound, such as a person speaking, is picked up by the microphone, recording will begin auto- matically.

●If a silence lasts for 3 seconds or more, the recording will be paused automat- ically. However, the unit will not pause for about the first 10 seconds after recording has started.

To interrupt a synchro recording:

Press the 06 button while recording.

●The Mic synchro recording mode will be canceled, and the unit will enter the recording stand-by mode.

●To resume synchro recording, press the ENTER/F.PLAY/SYNCHRO button again.

To stop recording:

Press the ■/:OFF button.

■Recording from the microphone (Mic manual recording)

●You can start recording manually (any time you like).

1 Put the unit in the recording stand-by mode. (Perform steps 1 - 4 in the “Mic synchro recording” section.)

2 Press the 06 button.

●Recording will start.

To interrupt a recording:

Press the 06 button while recording.

●The unit will enter the recording stand- by mode.

●To resume recording, press the 06 button again.

The track number will be increased by one each time you interrupt a record- ing.

To stop recording:

Press the ■/:OFF button.

Notes:

●If you want to use a microphone, be sure it is a plug-in power type microphone that can be powered by the main unit.

●Insert the plug firmly. Otherwise, the recording will not be made properly.

●Use a microphone with a 1/8" (3.5 mm) diameter stereo mini plug.

●When a recording is made using a stereo microphone (optionally available), an analog recording will be made.

●While making a mic recording, do not connect anything to the LINE IN jack on the main unit.

14

MD-MS702

Page 15
Image 15
Sharp MD-MS702, MD-R2 operation manual To interrupt a synchro recording, Recording from the microphone Mic manual recording