Assembly:
Included in the box are the following pieces: [The number or letter inside the ( ) is how the pieces will be referred to in the instructions. ]
•1 game board
•2 curved tubes (A)
•2 tubes 14.25” long (B)
•1 tube 19.75“ long (C)
•2 tubes 18” long (D)
•1 center connector (1)
•2 side connectors (2)
•2 corner connectors (3)
•2 feet (4)
•3 scoring markers (5)
(1)
(A)
(A)
Step 1: Insert 2 (A) tubes into the opening on the top | Step 2: Rotate, or bend out slightly, the 2 (A) tubes that |
pockets of the game board. | were just inserted and place the (1) center connector into |
| one of the open ends. Rotate the 2 (A) tubes back together |
| making sure the center connector fits tightly inside the tubes. |
| [Note: This is a very tight fit. Please bend carefully.] |
(2) | (2) |
(B)
(C)
(3)
Step 3: Insert 2 (2) side connectors into the openings on the side pockets connecting them to the (A) tubes.
Step 4: Insert 2 (B) tubes into the side pockets on the game board. Fit the tubes onto the (2) side connectors.
Step 5: Connect 1 (3) corner connector to the (B) tube. Slide 1 (C) tube into the lower pocket on the game board until it connects firmly to the (3) corner connector.
(3) | (D) | (5) | (5) |
|
| ||
|
|
| |
|
| (4) |
|
(2) |
| (5) |
|
| (D) | (4) |
|
|
|
|
Step 6: Insert 1 (3) corner connector to the open end of the |
|
(C) tube. Rotate, or bend out slightly, the (3) connector | Step 7: Insert 2 (D) tubes onto the open stems of the |
that was just inserted. Line it up with the open end in the | |
(B) side tube and press firmly until the pieces connect. | 2 (2) side connectors already on the game board. |
[Note: This is a very tight fit. Please bend carefully.] | Insert 2 (4) feet into the open ends of the (D) tubes. |
Step 8: Snap the 3 (5) scoring markers onto the game board as shown above. Place in the locations shown.
