GE PT925 manual Thermal Cut Outs, To remove the lock assembly, To remove the thermal cut outs

Strip Circuit

UNLOCKED J16

5

4

3

2

1

J17-Pin9

To remove the lock assembly:

1.Remove the main rear access panel. (See Rear Access Panels.)

2.Remove the two T15 Torx screws from the front of the oven that secure the lock assembly in place.

3.Disconnect the motor and switch wiring harnesses from the lock assembly.

Thermal Cut Outs

When either of the 2 thermal cut outs are open, L2 is cut off from the oven.

The thermal cut outs are rated at:

•Upper oven TCO = 177°C/350°F

•Lower oven TCO = 150°C/302°F

Upper Oven Thermal Cut Out

Lower Oven Thermal Cut Out

Disconnect

Lock Assembly

Disconnect

4.Slide the lock assembly through the channel and out through the back of the oven.

To remove the thermal cut outs:

1.Remove the main rear access panel. (See Rear Access Panels.)

2.Disconnect the wires, and remove the two 1/4- in. hex-head screws that attach the thermal switch to the oven.

Disconnect	Disconnect
Disconnect	Disconnect

– 39 –