GE PT925 Oven Components, Door Assemblies, To remove the lower door, To remove the upper door

Oven Components

Door Assemblies

The upper door contains many of the electronics and controls for the oven.

Caution: The doors are heavy. Use the correct lifting procedure. Do not lift the doors by the handles.

To remove the lower door:

1.Open the door fully.

2.Push the hinge locks down toward the door frame, to the unlocked position. (This may require a flat-blade screwdriver to start the hinge locks moving.)

Pull down	Upper
to access
	Oven
	Lower
	Oven
	Snap engages
	with door
	frame

Slider Assembly

3.Pull the tab forward to release the ribbon cable assembly from the door.

Slot

Hinge lock

3.Firmly grasp both sides of the door at the top.

4.Close the door to the door removal position.

5.Lift the door up and out until the hinge arm is clear of the slot

To remove the upper door:

1.Fully open or remove the lower door.

2.Pull down on the ribbon cable until the snap engages with the door frame.

Press tab	Pull down to
	disconnect
to release	ribbon cable
ribbon	assembly
cable

4.Fully open the upper oven door.

5.Lift up on the hinge locks toward the oven frame until they stop.

Hinge Lock

(Unlocked Position)

Slot

Hinge

Lock

6.Close the door to 45 degrees. The hinge lock will contact the oven frame.

Removal Position

(Continued next page)

– 28 –