GE PT925 manual Fahrenheit or Celsius Temperature Selection, Tones at the End of a Timed Cycle

Models: PT925

1 62
Download 62 pages 42.2 Kb
Page 21
Image 21
Fahrenheit or Celsius Temperature Selection

+

+

Fahrenheit or Celsius Temperature Selection

Your oven control is set to use the Fahrenheit temperature selections, but you may change this to use the Celsius selections.

1.Touch the upper oven BROIL HI/LO and BAKE pads at the same time until the display shows "SF".

2.Touch the COOK TIME and BROIL HI/LO pads at the same time. The display will show "F" (Fahrenheit).

3.Touch the COOK TIME and BROIL HI/LO pads again at the same time. The display will show "C" (Celsius).

4.Touch the START pad.

_________________________________________________________________________________________

+

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continual 6-second beep may be canceled.

To cancel the 6-second beep:

1.Touch the upper oven BROIL HI/LO and BAKE pads at the same time until the display shows "SF".

2.Touch the BROIL pad. The display shows "CONTI BEEP" (continuous beep). Touch the BROIL pad again. The display shows "SINGLE BEEP". (This cancels the one beep every 6 seconds.)

3.Touch the START pad.

_________________________________________________________________________________________

+

Tone Volume

This feature allows you to adjust the tone volumes to a more acceptable volume. There are three possible volume levels.

1.Touch the upper oven BROIL HI/LO and BAKE pads at the same time until the display shows "SF".

2.Touch the COOK TIME pad. The display will show "2 BEEP". This is the middle volume level.

Touch the COOK TIME pad again. The display will show "3 BEEP". This is the loudest volume level.

Touch the COOK TIME pad again. The display will show "1 BEEP". This is the quietest volume level.

For each time the level is changed, a tone will sound to provide an indication of the volume level.

3.Choose the desired sound level (1 BEEP, 2 BEEP, or 3 BEEP).

4.Touch the START pad to activate the level shown.

(Continued next page)

– 21 –

Page 21
Image 21
GE PT925 manual Fahrenheit or Celsius Temperature Selection, Tones at the End of a Timed Cycle, Tone Volume