GE PT925 manual Side Access Panels, To remove the side access panels

Models: PT925

1 62
Download 62 pages 42.2 Kb
Page 33
Image 33
Side Access Panels

9.To access the slider board assembly, remove the 3/8-in. nut securing the insulating cover.

10.To remove the board from the slider board assembly, press the two tabs securing the board to the slider and lift the board from the assembly.

Side Access Panels

There are two side panels on each side of the oven.

To remove the side access panels:

1.Remove the oven. (See Oven Removal.)

2.On each side of the oven, remove the four 1/4- in. hex-head screws that hold the side trim in place.

Panel One

Side Trim

Panel Two

Left Side Shown

3.Remove the two T10 Torx screws that hold the bracket to the oven.

4.Remove the 1/4-in. hex-head screws that hold the two side panels to each side of the oven. There are 46 hex-head screws on the left side and 41 screws on the right side.

1 of 46

Torx

Screw

 

Bracket

Torx

Screw

 

Left Side Shown

– 33 –

Page 33
Image 33
GE PT925 manual Side Access Panels, To remove the side access panels