Furuno 1932 MARK-2 manual Table Of Contents

TABLE OF CONTENTS

SYSTEM CONFIGURATION		iv
EQUIPMENTS LIST		v
1. MOUNTING
1.1	Mounting Methods for Scanner Unit	1-1
1.2	Fixing Holes in Mounting Platform	1-1
1.3	Fastning the Radiator to the Radiator Bracket	1-2
1.4	Mounting the Scanner Unit	1-2
1.5	Display Unit Mounting	1-4
2. CONNECTIONS
2.1	Connecting the Signal Cable	2-1
2.2	Display Unit Connections	2-2
2.3	Connection of External Equipment	2-3
2.4	Exchange of Fuse for 24/32V Power Supply	2-4
2.5	Checking the Installation	2-4
3. ADJUSTMENTS
3.1	Preparation	3-1
3.2 Adjusting Tuning/Video		3-1
3.3	Entering Antenna Height	3-1
3.4 Aligning Heading		3-2
3.5 Adjusting Sweep Timing		3-2
3.6 Adjusting MBS		3-3
3.7	Selecting STC Curve	3-3
3.8	Setting Dead Sector	3-3
3.9	Checking Magnetron Heater Voltage	3-4
4. INSTALLATION OF ARP-10 (OPTION)
4.1	Necessary Parts	4-1
4.2	Mounting	4-1
4.3 Adjustments		4-1
INSTALLATION MATERIALS, ACCESORIES, SPARE PARTS		A-1
OUTLINE DRAWING		D-1
SCHEMATIC DIAGRAM		S-1

iii