6.MAINTENANCE & TROUBLESHOOTING
RUDDER SETUP AND AUTO TEST
The rudder test checks the following, and then shows the result of the check.
•Drive type
•The presence or absence of bypass/clutch circuit
•Rudder deadband
•Rudder speed
This test should be executed when the boat does not run because of moving the rudder.
When the rudder test is finished, a beep sounds and the message “RUDDER TEST COMPLETED” and the results are shown.
RUDDER SETUP AND AUTO TEST
DRIVE TYPE: | _ |
BYPASS/CLUTCH: | _ |
RUDDER DB : | _. _ |
RUDDER SPEED: | _ _. _ /s |
RUDDER DUTY: | _ _% |
PUSH MENU KEY TO RETURN.
40 20 | 10 5 | 5 | 10 | 20 40 |
Rudder test
DRIVE TYPE: REVERSIBLE or SOLENOID
BYPASS/CLUTCH: EXIST or NON
RUDDER DB: Shows the rudder deadband
RUDDER SPEED: Rudder speed
RUDDER DUTY: Rate of the rudder driving.
